Off: All the indicators will light off.
â–
Camera Selection
Select the camera to which the "Indicator" setting is to be sent.
Mark the checkbox of the camera to which the setup information is to be transmitted.
[Transmission] button
Transmit the setting of the "Indicator" to the camera. Once transmission is completed and
the setting has been applied to the camera, "OK" will be displayed in the "Results" field.
If the display reads "Authentication error", etc., the camera connection or the setting may
have failed.
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
Set the camera image transmission priority [Transmission priority]
Select the transmission priority setting for each camera and transmit the information to the
cameras to change the camera settings.
Clicking the [Setup >] button for "Transmission priority" on the [Camera setup] tab will
display the setup page.
[Setup via recorder's main monitor]
33
To Next Page
Loading...
Need help?
General
