i.safe MOBILE IS655.2 - MicroSD Card Handling; Device Charging Procedures

EN 11
INSERT/REMOVE microSD CARD
DANGER
An incorrect procedure in explosion hazardous areas poses a risk of death or severe injuries!
Only open the device outside of explosion hazardous areas to insert or remove the microSD
card.
NOTICE
Proceeding incorrectly when inserting/removing the microSD card can damage the device
and the microSD card. Switch o the device before inserting or removing a microSD card. Do
not charge the device while inserting or removing a microSD card.
Insert the microSD card into the slot. The device has a slot for one SIM card in combination
with a microSD card up to 128 GB, also see section “Insert/remove SIM card”.
CHARGING
DANGER
An incorrect procedure in explosion hazardous areas poses risk of death or severe injuries!
Only charge the device outside of explosion hazardous areas. Do not charge the device in the
vicinity of ammable substances.
NOTICE
Incorrect charging can cause damage to the device. Please note the following when charging:
Only charge the device using the Micro USB Cable supplied.
Only charge the device at ambient temperatures between +5°C to +35°C (+41°F to +95°F).
Charge the device under dry indoor conditions only.
Do not charge the device in environments dusty or humid.
Your device package contains a power supply unit, various country-specic adapters and an
Micro USB Cable.
Connect the adapter suitable for your country to the power supply unit.
Connect the Micro USB Cable to the power supply unit.
Connect the Micro USB Cable to the USB interface of the device.