I.SOUND 4X User Manual (English)

4X Portable Speaker System

HOW TO SET UP THE I.SOUND 4X PORTABLE SPEAKER SYSTEM:

1. Open the battery compartment located on the back of the speaker.

2. Insert 6 “AA” batteries.

NOTE: You may also power the i.Sound 4X Portable Speaker System using the

included AC adapter.

3. Attach the cradle to the front of the speakers. It will snap into the 2 holes on the front

of the speakers.

4. Move the power switch located on the top of the speaker to the “ON” position. The

LED will confirm the speaker is powered on.

5. Locate the 3.5 mm cable on the bottom of the casing, unwind it and plug it into your

audio device.

NOTE: Always power the speaker “OFF” when not in use.

PACKAGE CONTENTS:

• i.Sound 4X Portable Speaker System

• Cradle

• AC Adapter

Need help?

Do you have a question about the I.SOUND 4X and is the answer not in the manual?

I.SOUND 4X Specifications

General

Locate and open the battery compartment on the back of the speaker.

Insert 6 'AA' batteries or use the included AC adapter for power.

Attach the cradle to the front and move the power switch to 'ON'.

Locate the 3.5 mm cable, unwind it, and plug it into your audio device.

Contact 1-877-999-DREAM or support@dreamgear.net for technical assistance.