EasyManua.ls Logo

IACER I-TECH MAG2000 PLUS - Patient Preparation and Application; Positioning the Belt and Solenoids; Application Scenarios

IACER I-TECH MAG2000 PLUS
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IACER Srl 14 MNPG53-07
In case you need to use the extended treatment device (even up to 8
hours) it is advisable to use an intensity not exceeding 50G for all
programs. In this case the efficacy of the treatment is given by the
prolonged time of therapy rather than the maximum field intensity
settable. High field intensities (above 80/100G) are indicated for short
treatments (up to 2 hours) or in the presence of rigid
bandages/braces.
Applied parts. It’s necessary to consider as applied parts not only all
accessories (belt with 2/3 solenoids, professional solenoids couple, etc.) but
also the device and the power supply that can get in contact with the user
during the treatment.
Patient preparation: positioning of the therapeutic belt and
solenoids, main applications and suggestions
Here below a list of main positions for the therapeutic belt and for the
solenoids couple.
Wrap the belt around the area to be treated (or position the belt on the
area, for example in vertebral column treatment). During this phase take
care to place the green side of the therapeutic belt on the skin.
The professional solenoids couple must be placed on the area to be treated
(in opposite position or position on the area, for example in vertebral
column treatment). Also, in this case take care to place the green side of
the therapeutic belt on the skin.
Ankle
Hip
Back (lumbar)
Knee
Shoulder
Wrist
Elbow
Cervical

Related product manuals