Fig. 9
17
Side opening door.
N.B.: The doors opening direction (right-hand or left-hand) can be changed.
Warning: this operation must be carried out by skilled staff during assembly.
1) Open the oven door and undo the two screws in the block A (see figure 9).
(N.B.: when block A is unscrewed, the bottom of the door is left completely free. Two people are
therefore needed for this operation, one to hold the door firmly while the screws are undone).
2) Reassemble the door on the required side of the oven, use the new block A (accessory supplied
with the appliance) and reverse the above instructions.
A
A
To Next Page
Loading...
