Need help?Do you have a question about the IBA ibaBM-DPM-S-64 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Product Type | Data Acquisition Module |
| Manufacturer | IBA |
| Model | ibaBM-DPM-S-64 |
| Number of Channels | 64 |
| Interface | Ethernet |
| Measurement Principle | Digital |
| Resolution | 16-bit |
| Accuracy | ±0.1% of full scale |
| Input Voltage Range | ±10 V |
| Power Supply | 24 V DC |
| Input Channels | 64 |
| Operating Temperature | 0°C to +50°C |
Identifies the intended audience for this manual.
Explains the conventions and symbols used in the manual.
Details safety symbols and their meanings.
Describes the device as a Profibus interface for data acquisition.
Explains how the new device can replace older models.
Specifies the approved applications and usage of the device.
Provides specific warnings and cautions for safe operation.
Lists the necessary hardware components and specifications.
Specifies the required software for device operation and integration.
Step-by-step guide for physically installing the device.
Instructions for safely removing the device from its installation.
Explains the internal hardware architecture and components.
Describes the various ports and interfaces for communication.
Identifies and explains the external controls, connectors, and indicators.
Details integration with ibaPDA systems.
Shows how to link two Profibus DP networks.
Describes bidirectional communication with DP masters and ibaLogic.
Covers coupling with external control systems like VMEbus.
Introduces the fundamental concepts of device configuration.
Explains the different operating modes and data handling.
Details how to establish communication via Ethernet and USB.
Guides on how to connect to and access the device's web interface.
Describes general steps for applying the device in a Profibus network.
Details specific applications using the device with SIMATIC S7.
Explains how to configure the device using the ibaPDA-V6 I/O Manager.
Describes how to output data from ibaPDA to the Profibus master.
Lists the primary technical specifications and properties.
Describes the device's physical connections and status indicators.
Details data transfer rates and protocols.
Shows the physical dimensions and layout of the device.
Offers contact details for technical support.
Lists headquarters and regional contact information.
To Next Page
