To Next PageTo Next Page
Need help?Do you have a question about the Ibarmia A-40 and is the answer not in the manual?
Verifies the circular runout of the spindle taper.
Measures the flatness of the machine's work surface.
Checks table perpendicularity to the spindle axis.
Checks table perpendicularity to head feed axis.
Machine inspection upon arrival and routine cleaning procedures.
Machine foundation requirements and voltage adaptation steps.
Procedures for filling and draining machine oil reservoirs.
Identifies weekly lubrication points and their schedule.
Lists recommended oils and greases for machine lubrication.
Explains operation of speed selection and feed mechanisms.
Details depth stop function and torque limiter adjustment.
Describes adjustment of the spring for spindle retraction force.
General| Spindle speed | 6000 rpm |
|---|---|
| X axis travel | 1200 mm |
| Y axis travel | 600 mm |
| Z axis travel | 600 mm |
| Spindle power | 18.5 kW |
| Table dimensions | 1200 x 600 mm |
| Spindle Motor Power | 18.5 kW |
| X-Axis Travel | 1200 mm |
| Y-Axis Travel | 600 mm |
| Z-Axis Travel | 600 mm |
| Table Size | 1200 x 600 mm |
| Machine Weight | 6500 kg |
