Need help?Do you have a question about the IBBL FR-600 and is the answer not in the manual?
General| Brand | IBBL |
|---|---|
| Model | FR-600 |
| Category | Water Filtration Systems |
| Language | English |
Describes the external serpentine feature of IBBL purifiers.
Features a 3-liter stainless steel reservoir with Nanotechnology for easy cleaning.
Equipped with a high-flow faucet for efficient water dispensing.
Utilizes compressor refrigeration for guaranteed cold water.
Allows for adjustment of the water temperature to user preference.
Uses R134a gas, which does not harm the ozone layer.
Designed for efficient operation with minimal energy usage.
Offers IPX-4 protection, suitable for indoor and outdoor environments.
Details the procedure for fixing the FR-600/FRQ-600 purifier to the wall.
Specifies the required minimum distance between the purifier and the wall.
Instructions for connecting the water supply using a 1/2" thread.
Outlines acceptable water pressure (0.03-0.60 MPa) and ambient operating temperatures.
States the recommended water flow rate for optimal performance is 60 liters per hour.
Specifies water should be from public networks or chlorinated, meeting health standards.
IBBL filters comply with NBR 14908/2004, offering 3000 liters of chlorine retention.
Warns users about high temperatures from hot water models and potential burns.
Explains thermostat operation and notes factory settings for optimal performance.
Identifies the location of thermostat and boiler buttons for different models.
Advises periodic cleaning of the reservoir with an anti-bacteria solution by authorized personnel.
Prohibits using water jets or abrasive products that could affect water taste.
Checks for power, correct voltage, and thermostat setting when the unit fails to start.
Addresses noise issues by checking electrical network tension and voltage levels.
Guides on adjusting the thermostat clockwise to achieve colder water.
Suggests contacting customer service for leaks, possibly due to thermostat issues.
Troubleshooting includes checking water supply, filter saturation, and safety float.
Advises checking the water separating funnel fit when both taps dispense cold water.
Checks water pressure and filter validity for low flow from the natural water tap.
Provides contact information for customer service and technical support.
To Next Page