You have gone through
the
PICs without'resolving
your
problem. The following steps should help
you
to
find
additional
audio
or
visual symptoms.
1.
Check the entire system for loose
or
damaged connectors.
2. Review PIC 010,
"Start."
3. Select "Utilities" in the diagnostic menu, start an error
log, and select
"Run
tests multiple times." This will
allow.,
you
to
exercise the machine thoroughly and identify the
failing symptom. When
you
have identified
the
symptom,
go
to
PIC
010
"Start"
or
the appropriate PIC for
that
symptom.
If
you
have followed these procedures and still have an
unresolved problem,
you
should seek technical assistance.
500-17
To Next Page
Loading...
