IBM 7026-H80 - RS/6000 - 256 MB RAM - Page 222

Table 5. Firmware Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
21F2 0003 SCSI read/write optical - send
diagnostic failed- sense data
available
Before replacing any system
components, refer to the notes in
error code 21A0 0001.
Replace the SCSI device.
21F2 0004 SCSI read/write optical - send
diagnostic failed- DevOfl cmd
Before replacing any system
components, refer to the notes in
error code 21A0 0001.
Replace the SCSI device.
2200 0001 PCI Ethernet BNC/RJ-45 or PCI
Ethernet AUI/RJ-45 Adapter
internal wrap test failure
Replace the adapter.
See “Checkpoint and Error Code
Index” on page 165 for location code
information related to this error. Also
see “Replacing the Network Adapter”
on page 163.
2200 1001 10/100 Mbps Ethernet PCI Adapter
internal wrap test failure
Replace the adapter.
See “Checkpoint and Error Code
Index” on page 165 for location code
information related to this error. Also
see “Replacing the Network Adapter”
on page 163.
2201 0001 PCI Auto LANstreamer token ring
adapter
Adapter failed to complete hardware
initialization.
Replace the adapter.
See “Checkpoint and Error Code
Index” on page 165 for location code
information related to this error. Also
see “Replacing the Network Adapter”
on page 163.
2201 1001 PCI token ring adapter
Adapter failed to complete hardware
initialization.
Replace the adapter.
See “Checkpoint and Error Code
Index” on page 165 for location code
information related to this error. Also
see “Replacing the Network Adapter”
on page 163.
25A0 0001 Cache L2 controller failure 1. Replace the processor card.
Location: U1.1-P1-C1
2. Replace the CEC backplane
assembly.
Location: U1.1-P1.
25A1 0001 Cache L2 SRAM failure 1. Replace the processor card.
Location: U1.1-P1-C1
204 Service Guide