Table 5. Firmware Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
25Cy y001 DIMM is not supported Replace unsupported DIMM(s). Note
that DIMMs are in groups (2, 4, 8, 16
or 32 DIMMs) but you may only
receive an error for a single DIMM.
Verify that all DIMMs in the group
containing the specified DIMM are of
the same type and size.
yy describes the DIMM as follows:
00 Unrecognized/unsupported
DIMM
28 512MB DIMM
38 128MB DIMM
58 32MB DIMM
68 256MB DIMM
78 1GB memory DIMM
Note: Refer to “System Memory” on
page 26 for DIMM configuration rules.
A DIMM must be replaced with a
supported type of DIMM, and all
DIMMs in a group must be of the
same size.
Check the system error logs to
determine the location code
associated with the error code.
Consult the “AIX and Physical
Location Code Reference Tables” on
page 36 to locate the DIMM and the
rest of its group.
Chapter 5. Error Code to FRU Index
207
To Next Page
Loading...