Appendix C. Parameter Worksheets
The worksheets in this appendix list the parameters that are needed during the
multiaccess enclosure installation.
Default parameter values are included (in parentheses) in the table.
For the multiaccess enclosure
Notes:
1. This is the address of the PCMCIA Token Ring card plugged on the system
card of the MAE.
2. If no gateway, specify the IP address of the service processor.
Table C-1. IP Addresses and Subnet Mask
Client IP address (multiaccess enclosure see note 1) (192.9.200.5)
Server IP address (Service Processor) (192.9.200.1)
Gateway IP address (see note 2) (192.9.200.1)
Subnet mask (255.255.255.240)
LAN link from the MAE to the 3746
Table C-2. LAN link to 3746
LAN link to 3746 required Ø Yes
Ø One link
Ø Two links
Ø No
Copyright IBM Corp. 1998, 1999 C-1
To Next Page