Multiaccess Enclosure Cables
Cable from the Multiaccess Enclosure System Card PCMCIA
Token-Ring Adapter to Service Processor
Refer to Figure I-2 on page I-2, reference .4/ and .2/. The cable .4/ needs a
Balun assembly .2/ for connecting to the 8228 (Service Ring).
1
22
1
8
RJ-45
Figure I-5. Cable between the Multiaccess Enclosure PCMCIA Card and the Service
Processor
Interchange Circuits for the Cable between the Multiaccess
Enclosure and the Service Processor
4
5
12
13
3
6
9
14
17
RJ45
Connector
PCMCIA
Connector
4
5
6
3
Shield
Figure I-6. Cable Pin Assignment (Part Number 782960)
Table I-2. Cable between the Multiaccess Enclosure and the Service Processor
Cable Type Length Part Number
Standard Fixed 9 m (27 ft.) 782960
I-4 3746-9X0: MAE Installation and Maintenance
To Next Page