Multiaccess Enclosure Cables
Cable from the Multiaccess Enclosure EIA-232 Connector to the
Service Processor
Refer to Figure I-2 on page I-2 reference .3/. An adapter cable .9/ is necessary
for connection to the service processor (see “Adapter Cable” on page I-7).
Connector
Female
Connector
Female
P1
P2
1
1
5
5
Figure I-9. Cable Pin (Part Number 782958)
Interchange Circuits for the Cable between the Multiaccess
Enclosure and the Service Processor
5
2
3
4
1
6
8
5
3
2
1
4
6
8
9-Pin
Connector
9-Pin
Connector
Figure I-10. Cable Pin Assignment (Part Number 782958)
Table I-3. Cable from the Multiaccess Enclosure EIA-232 Connector to the Service
Processor
Cable Type Length, m (ft) Cable Part Number
Standard Fixed 9 m (27) 782958
I-6 3746-9X0: MAE Installation and Maintenance
To Next Page