Figures
56Figure 45. Ultra DMA cycle timing (Host Terminating Read)
........................
55Figure 44. Ultra DMA cycle timings (Host Pausing Read)
..........................
54Figure 43. Ultra DMA cycle timing (Initiating Read)
...............................
53Figure 42. Multiword DMA cycle timings
.......................................
52Figure 41. PIO cycle timings
................................................
51Figure 40. System reset timings
.............................................
47Figure 39. Special signal definitions for Ultra DMA
...............................
46Figure 38. Table of signals
.................................................
45Figure 37. Interface connector pin assignments
.................................
40Figure 36. Weighted sound power
............................................
39Figure 35. Nonoperating shock
..............................................
38Figure 34. Operating shock
.................................................
38Figure 33. Random Vibration PSD Profile Breakpoints (nonoperating)
.................
37Figure 32. Swept sine vibration
.............................................
37Figure 31. Random vibration PSD profile breakpoints (operating)
....................
35Figure 30. Mounting hole locations for the 48 GB model
...........................
34Figure 29. Mounting hole locations for all models except 48 GB model
................
34Figure 28. Physical dimensions and weight
.....................................
30Figure 27. Typical current wave form at start up of IC25N015ATDA04-0
...............
30Figure 26. Typical current wave form at start up of IC25N030ATDA04-0
...............
29Figure 25. Typical current wave form at start up of IC25N048ATDA04-0
...............
28Figure 24. Power consumption efficiency
......................................
27Figure 23. DC Power requirements
...........................................
26Figure 22. Magnetic flux density limits
.........................................
25Figure 21. Limits of temperature and humidity
...................................
25Figure 20. Environmental condition
...........................................
23Figure 19. Examples of error cases.
..........................................
19Figure 18. Drive ready time for all models
......................................
19Figure 17. Operating modes
................................................
18Figure 16. Drive ready time
.................................................
18Figure 15. Latency time
...................................................
18Figure 14. Single track seek time
............................................
17Figure 13. Full stroke seek time
.............................................
17Figure 12. Mechanical positioning performance
..................................
16Figure 11. Performance characteristics
........................................
15
Figure 10. Cylinder allocation - 12-GB, 10-GB, 6-GB, 5-GB models
(IC25N012ATDA04, IC25N010ATDA04, IC25N006ATDA04,
IC25N005ATDA04,)
..............................................
14
Figure 9. Cylinder allocation - 15-GB, 7.5-GB models (IC25N015ATDA04,
IC25N007ATDA04)
...............................................
14Figure 8. Cylinder allocation - 20-GB model (IC25N020ATDA04)
....................
13Figure 7. Cylinder allocation - 30-GB model (IC25N030ATDA04)
....................
13Figure 6. Cylinder allocation - 48-GB model (IC25T048ATDA05)
....................
12Figure 5. Data sheet
.....................................................
12Figure 4. Formatted capacity by model number - (2 of 2)
...........................
11Figure 4. Formatted capacity by model number - (1 of 2)
..........................
11Figure 3. Default logical drive parameters
.....................................
4Figure 2. Handling Precaution 2
..............................................
4Figure 1. Handling Precaution 1
..............................................
Travelstar 48GH, 30GN & 15GN hard disk drive specifications
ix