6.8 Identification labels
The following labels are affixed to every drive:
! A label is placed on the top of the HDA containing the statement "Made by IBM" or equivalent,
Part No., EC No. and FRU No.
! A bar code label placed on the disk drive based on user request. The location on the drive is to be
designated in the drawing provided by the user.
! Labels containing the vendor's name, disk drive model number, serial number, place of manufacture
and UL/CSA logos.
! The presence of labels containing jumper information depending on the customer request.
6.9 Electromagnetic compatibility
When installed in a suitable enclosure and exercised with a random accessing routine at maximum data
rate, the drive meets the following worldwide electromagnetic compatibility (EMC) requirements:
! United States Federal Communications Commission (FCC) Rules and Regulations (Class B), Part
15.
RFI
Suppression German National Requirements
!
RFI
Japan
VCCI,
Requirements of
IBM
products
! EU EMC Directive, Technical Requirements and Conformity Assessment Procedures
6.9.1 CE Mark
The product is certified for compliance with EC directive 89/336/EEC. The EC marking for the certification
appears on the drive.
6.9.2 C-Tick Mark
The product complies with the Australian EMC standard "Limits and methods of measurement of radio
disturbance characteristics of information technology equipment, AS/NZS 3548:1995 Class B."
Travelstar 48GH, 30GN & 15GN hard disk drive specifications
42