13.23 Security Freeze Lock (F5h)
see belowStatus1 1 1 1 0 1 0 1Command
- - - - - - - -Device/Head1 - 1 D - - - -Device/Head
- - - - - - - -Cylinder High- - - - - - - -Cylinder High
- - - - - - - -Cylinder Low- - - - - - - -Cylinder Low
- - - - - - - -Sector Number- - - - - - - -Sector Number
- - - - - - - -Sector Count- - - - - - - -Sector Count
see belowError- - - - - - - -Feature
- - - - - - - -Data- - - - - - - -Data
7 6 5 4 3 2 1 0Register7 6 5 4 3 2 1 0Register
Command Block Input Registers
Command Block Output
Registers
V-0--0V000V00000
ERRIDXCORDRQDSCDFRDYBSYAMNT0NABT0IDN0UNCCRC
0123456701234567
Status RegisterError Register
Figure 110. Security Freeze Lock command (F5h)
The Security Freeze Lock Command allows the device to enter frozen mode immediately.
After this command is completed, the command which updates Security Mode Feature (Device Lock
Function) is rejected.
Frozen mode is quit only by a Power off.
The following commands are rejected when the device is in frozen mode. Refer to Figure 65 on page 90.
! Security Set Password
! Security Unlock
! Security Disable Password
! Security Erase Unit
Travelstar 60GH & 40GN hard disk drive specifications
152