IBM IC25N040ATCS04 - Travelstar 40 GB Hard Drive - Figure 143. Command Coverage (2 of 2)

Reserved
Reserved
Reserved: all remaining codes
Vendor specific
Reserved
Vendor specific
FB-FFh
Vendor specific
Yes
ENABLE/DISABLE DELAYED WRITE
FAh
Optional
Yes
SET MAX ADDRESS
F9h
Optional
Yes
READ NATIVE MAX ADDRESS
F8h
Vendor specific
Vendor specific
FORMAT UNIT
F7h
Optional (Note 6)
Yes
SECURITY DISABLE PASSWORD
F6h
Optional (Note 6)
Yes
SECURITY FREEZE LOCK
F5h
Optional (Note 6)
Yes
SECURITY ERASE UNIT
F4h
Optional (Note 6)
Yes
SECURITY ERASE PREPARE
F3h
Optional (Note 6)
Yes
SECURITY UNLOCK
F2h
Optional (Note 6)
Yes
SECURITY SET PASSWORD
F1h
Vendor specific
Vendor specific
SENSE CONDITION
F0h
Mandatory
Yes
SET FEATURES
EFh
Obsoleted
No
IDENTIFY DEVICE DMA
EEh
Optional (Note 7)
No
MEDIA EJECT
EDh
Mandatory
Yes
IDENTIFY DEVICE
ECh
Optional
Yes
WRITE BUFFER
E8h
Mandatory
Yes
FLUSH CACHE
E7h
Mandatory
Yes
SLEEP
E6h
Mandatory
Yes
CHECK POWER MODE
E5h
Optional
Yes
READ BUFFER
E4h
Mandatory
Yes
IDLE
E3h
Mandatory
Yes
STANDBY
E2h
Mandatory
Yes
IDLE IMMEDIATE
E1h
Mandatory
Yes
STANDBY IMMEDIATE
E0h
Optional (Note 7)
No
MEDIA UNLOCK
DFh
Optional (Note 7)
No
MEDIA LOCK
DEh
Optional (Note 7)
No
GET MEDIA STATUS
DAh
Optional (Note 7)
No
CFA WRITE MULTIPLE W/O ERASE
CDh
Optional
No
WRITE DMA QUEUED
CCh
Obsoleted
Yes
WRITE DMA
CBh
Mandatory
Yes
WRITE DMA
CAh
ATA-5 Command Type
Implementation
for Travelstar
60GH & 40GN
Command Name
Command
Code
Figure 143. Command coverage (2 of 2)
Note 1. These commands have two command codes and appear in this table twice, once for each
command code.
Note 2. The WRITE VERIFY command implemented vendor specific. The operation is the same as
WRITE SECTORS and verification is not performed.
Note 3. Protected Area Feature Set
Note 4. Power Management Feature Set
Note 5. S.M.A.R.T. Function Set
Note 6. Security Mode Feature Set
Note 7. Removable
Travelstar 60GH & 40GN hard disk drive specifications
198