11.5.2 LBA addressing mode
Logical sectors on the device shall be linearly mapped with the first LBA addressed sector (sector 0) being
the same sector as the first logical CHS addressed sector ( cylinder 0, head 0, sector 1). Irrespective of
the logical CHS translation mode currently in effect, the LBA address of a given logical sector does not
change. The following formula is always true:
LBA = ((cylinder x heads_per_cylinder + heads) x sectors_per_track) +
sector - 1
where heads_per_cylinder and sectors_per_track are the current translation mode values.
On LBA addressing mode, the LBA value is set to the following register:
<- - - LBA bits 7–0Sector Number
<- - - LBA bits 15–8Cylinder Low
<- - - LBA bits 23–16Cylinder High
<- - - LBA bits 27–24Device/Head
Travelstar 60GH & 40GN hard disk drive specifications
79
To Next Page
Loading...
