Input Parameters From The Device
Sector Count
This parameter represents the number of requested sectors not transferred. This
number will be zero—unless an unrecoverable error occurs.
Sector Number
The sector number of the last transferred sector. (L=0)
In LBA mode this register contains the current LBA bits 0–7. (L=1)
Cylinder High/Low
The cylinder number of the last transferred sector. (L=0)
In LBA mode this register contains current LBA bits 8–15 (Low), 16–23 (High).
(L=1)
H
This parameter represents the head number of the last transferred sector. (L=0)
In LBA mode this register contains current LBA bits 24–27. (L=1)
Deskstar 60 GXP Hard disk drive specification
186
To Next Page
Loading...
