Updates and Corrections
Corrections
Note the following corrections:
The Recovery CD does support Windows 98.
The Diskette Factory program does support Windows 98.
Using a PC Card
You can use a PC Card without PC Card support software
(CardWizard). For details on how to use a PC Card, see the manual
for Windows 98.
In addition, if you are using a communication card such as a PC
Card modem or a network PC Card, you should not enter your
computer into suspend mode, enter it into hibernation mode, or click
on Stand by in the “Shut Down Window” window.
Note: If you want to enter your computer into suspend mode, first
stop the PC Card in the “PC Card (PCMCIA) Properties”
window as follows:
1.
Click on Start, move the cursor to Settings, and click on
Control Panel.
2.
Double-click on PC Card (PCMCIA).
3.
From the list, select the card you are stopping.
4.
Click on the Stop button.
If you remove a communication PC Card from the PC Card slot and
then reinsert it later, it might not work correctly. You need to reboot
your computer.
Using Power Management
For information about power management, see the
Online User's
Guide
rather than the
User's Guide
.
In addition, note the following:
Suppose you activate the alarm action as follows:
Notification: Display message
Power level: When the alarm goes off, the computer will Standby.
Now, if your computer enters into suspend or hibernation mode when
the battery is low before the alarm message appears, you see the
4 IBM ThinkPad 385XD Guide for Windows 98
Title: C79FZMST CreationDate: 06/15/98 22:38:45
To Next Page
Loading...
Need help?
General
