IBM PC 300GL

This bootstrap program is small, which helps prevent network congestion.
Hybrid RPL avoids the network traffic associated with a standard RPL.
Remote administration
A network administrator can use this feature to update remotely the POST
and BIOS in your computer. Network management software, such as
LANClient Control Manager, is required in order to take advantage of this
feature. Refer to “Setting remote administration” on page 39 for
configuration information.
LANClient Control Manager (LCCM)
LANClient Control Manager is a graphical, server-based program that aids
in system deployment by allowing mass unattended system installation of
operating systems, complete software images, device drivers, and BIOS
updates. Used with Wake on LAN, LCCM can remotely start up your
system from a powered-off state, which means all this can be done while
the system is not being used. If you have purchased an IBM PC, LCCM is
available for downloading at no additional charge (Internet access fees
excepted).
For more information or to download this software visit:
http://www.ibm.com/pc/us/desktop/lccm
System Migration Assistant (SMA)
System Migration Assistant (SMA) delivers wizard-like functionality to help
administrators remotely transfer configurations, profile settings, printer
drivers, and files from an IBM or non-IBM PC to supported IBM systems.
If you have purchased an IBM PC, SMA is available for downloading at no
additional charge (Internet access fees excepted).
For more information or to download this software visit:
http://www.ibm.com/pc/us/software/sysmgmt/products/sma
Desktop Management Interface
Desktop Management Interface (DMI) is a method for gathering information
about the hardware and software in your computer. In a network
environment, network administrators can use DMI to remotely monitor and
control your computer. For more information about DMI, refer to
Understanding Your Personal Computer (provided on the Software Selections
CD that comes with your computer).
24 PC 300GL User Guide