Table 3 (Page 4 of 5). Network-related settings
To configure: Select: Comments:
Modem Ring
Detect
1. Power Management
2. Automatic Power On
3. MODEM Ring Detect
4. Enabled or Disabled.
If you select Enabled,
go to the next step.
5. Startup Sequence
6. Primary or Automatic.
Go back to the main
menu.
7. Start Options
8. The first, second, third,
and fourth primary
startup devices
9. Automatic Power On
Startup Sequence
10. The first, second, third,
and fourth startup
devices
You might not be able to
select four startup devices
for your model.
Chapter 4. Configuration/Setup Utility program 47
To Next Page
Loading...
