The supervisor password protects the system information in
Easy-Setup from being changed by unauthorized persons.
For more information about these passwords, refer to the
ThinkPad
User's Guide
.
Selectable Drive-Startup Sequence
Selectable drive-startup (selectable boot) allows you to control the
startup sequence of the drives in your computer. The order in which
the computer looks for the drives for your operating system is the
drive-startup sequence
. If you are working with multiple operating
systems, you might want to change the drive-startup sequence to
load the operating system from the hard disk without first checking
the diskette drive, or to do a remote program load (RPL).
Attention
When changing your startup sequence, you must be extremely
careful when doing write operations (such as copying, saving, or
formatting). Your data or programs can be overwritten if you select
the wrong drive.
For more information about the selectable drive-startup sequence,
refer to the
ThinkPad User's Guide
.
2-32 System Board
To Next Page
Loading...
