Increasing Memory
3
Loosen the screw on the memory slot cover; then remove
the cover.
4
Install the DIMM into the memory slot.
Attention
To avoid damaging the DIMM, do not touch its contact
edge.
a
Find the notch on the side of the DIMM.
b
With the notched end of the DIMM toward the right side
of the socket, insert the DIMM, at an angle of
approximately 20°, into the socket; then press it firmly
1 .
c
Pivot the DIMM until it snaps into place 2 .
If you want to install two DIMMs, repeat these steps.
50
IBM ThinkPad 600 User's Reference
Title: C79EGMST CreationDate: 02/10/98 09:24:42
To Next Page
Loading...
