Increasing Memory
6
Replace the battery pack.
7
Turn the computer over again, power on the computer;
then confirm that the new memory size appears at the
upper left corner of the screen.
For example, if you install the 32-MB DIMM you should see the
following: See the next page for how to calculate the total
memory size.
6496 KB OK
You have finished installing the DIMM. Reconnect all cables.
Notes:
1. For the following status, power off the computer and go to page 50 to
reinstall the DIMM and do the memory test with Easy-Setup (see
“Testing Your Computer” on page 144).
If a 21 error code appears under the memory count.
48576 KB OK
2 1
If the total memory size is not the same as the value you calculated.
If the 225 error code appears, the memory you are installing is not
supported by your computer.
2. If you changed the memory installed in the computer, you need to create
a new hibernation file. To create the hibernation file
“Basic” in the
online book.
52 IBM ThinkPad 600 User's Reference
Title: C79EGMST CreationDate: 02/10/98 09:24:42
To Next Page
Loading...
