Functions of Your Computer
WIN
NT
For Windows NT:
To start the ThinkPad Configuration program for Windows NT, do as
follows:
1
Click on Start at the bottom corner of the screen.
2
Move the cursor on Programs, ThinkPad; then click on
ThinkPad Configuration.
The following window appears:
1
2
3 4 5
9
6
8
7
9
1 The One-Touch Setup buttons. Click on one of these buttons
to set the system configuration.
2 The Power Mode buttons. Click on one of these buttons to set
the power mode to High Performance mode, Automatic mode,
or Customized mode.
3 The Display Device buttons. Click on one of these buttons to
set the display output type to the LCD, external monitor (CRT),
or both. When making a presentation, you can click on the
Chapter 1. Getting Familiar with Your Computer 27
To Next Page
Loading...
