Backing Up Your System
If you have a CD-ROM or DVD-ROM drive installed in your
computer's UltraslimBay and you don't have an external diskette
drive attached, go to “Case 1” on page 32.
If you have a CD-ROM or DVD-ROM drive installed in your
computer's UltraslimBay and you do have an external diskette
drive attached, go to “Case 2” on page 33.
If you have a diskette drive installed in your computer's
UltraslimBay, replace it with the CD-ROM or DVD-ROM drive
(see “Replacing an UltraslimBay Device” on page 89). Then go
to “Case 1.”
Case 1:
Your computer supports startable CDs when the startable
CD-ROM function is enabled. To use the Recovery CD, enable this
function; then recover the system:
1
Power off the computer.
2
Insert the Recovery CD into the CD-ROM or DVD-ROM
drive.
3
Power on your computer while pressing and holding the
F1 key.
Hold the F1 key until the Easy-Setup window appears.
4
Click on Start up.
5
Click on Power-on.
6
Click on Reset.
7
Click on CDROM.
8
Click on OK.
9
Click on Exit.
The startable CD-ROM function is enabled.
10
Click on Restart and then OK.
The computer restarts.
32 IBM ThinkPad 600E User's Reference
To Next Page
Loading...
