Replacing the Battery Pack
Replacing the Battery Pack
To replace the battery pack, do as follows:
1
Power off your computer, or enter hibernation mode..
2
Disconnect the AC Adapter and cables.
3
Close the LCD, and turn the computer over.
4
Slide the battery pack latch to unlocked position 1 ;
then remove the battery pack 2 .
1
2
5
Align the front of the fully charged spare battery pack
with the front side of the battery space in the computer
1 ; then put the battery pack in place 2 .
1
2
You can replace the battery when the computer is in hibernation
mode. (You cannot replace it when the computer is in suspend
mode.) If you are using a PC Card, however, the computer
might not be able to enter hibernation mode. If this happens,
power off the computer.
36 IBM ThinkPad 600E User's Reference
To Next Page
Loading...
