Increasing Memory
Removing the DIMM
1
Power off the computer and disconnect the AC Adapter
and all cables from the computer.
2
Close the LCD, turn the computer over, and then remove
the battery pack.
3
Loosen the screw and remove the memory slot cover.
4
Press out on the latches on both edges of the socket at
the same time.
5
Remove the DIMM.
Be sure to save the DIMM for future use.
6
Replace the memory slot cover; then tighten the screw.
7
Replace the battery pack.
8
Turn the computer over again; then connect the AC
Adapter and all the cables you disconnected.
54 IBM ThinkPad 600E User's Reference
To Next Page
Loading...
