the image with the TrackPoint or other pointing device. You
can change the display output type to the LCD, external
monitor (CRT), or both with the Display Device buttons of
the ThinkPad Configuration program or with Fn+F7.
You can set up the external monitor as follows:
1
Double-click on My Computer, Control Panel, and
then Display.
The “Display Properties” window appears.
2
Click on the Settings tab.
3
Click on the Advanced... button.
4
Click on the Monitor tab.
5
Click on the Change... button.
The “Update Device Driver Wizard” window appears.
|
6
Select the Next button, and follow the instructions on
| the screen by selecting Display a list of all the
| drivers in a specific location, so you can select the
| driver you want; and then Show all hardware.
|
7
Select Manufacturers and Models for your monitor,
| and follow the instructions on the screen.
|
8
Click on OK to close the “Properties” window after
| updating the driver.
|
9
Set Colors and Screen area in the “Display
| Properties” window.
10
Click on the OK button.
How can I set up the external monitor if the Windows
plug-and-play feature does not detect it?
Do as follows:
|
1
Make sure you are using a D-Sub (Subminiature-D)
| connector cable.
|
2
Double-click on My Computer, Control Panel, and
| then Display.
| The “Display Properties” window appears.
Chapter 7. Frequently Asked Question 101
To Next Page
Loading...
