| Diskette for Windows 95/98 Disk 3 into the drive, and click on
| OK.
|
18
When the file copy has completed, click on Finish.
Note: The MIDI connector is available if the computer is attached to
the docking station (option). The MIDI connector capability is
disabled as a default, so you need to enable the function with
the ThinkPad Configuration program.
Installing the IBM TrackPoint Driver for Windows 98
To install the TrackPoint driver for Windows 98:
1
Start Windows 98.
2
Insert the TrackPoint Driver Diskette for Windows 95/98/NT into
the diskette drive.
3
Click on Start.
4
Move the cursor to Settings; then click on Control Panel.
5
Double-click on the System icon.
6
Click on the Device Manager tab at the top of the “System
Properties” window.
7
Double-click on the Mouse icon.
8
Double-click on either PS/2 Compatible Mouse Port or PS/2
TrackPoint whichever choice appears in the list.
9
Click on the Driver tab.
10
Click on Update Driver....
The “Update Device Driver Wizard” runs.
11
Click on Next.
12
Click on Display a list of all the drivers in a specific
location.
13
Click on Next.
Chapter 8. Installing Software 113
To Next Page
Loading...
