9
Refer to the Windows 95 documentation and the instructions
that appear on the screen to complete the installation.
10
Change the current drive letter to the CD-ROM drive letter, and
run \USBSUPP.EXE in the \OTHERS directory of the CD-ROM.
11
Change the drive letter at the DOS prompt to A, and run
\QFE444\PCCARDUP.EXE
12
Reboot the system.
13
To replace the Unimodem drivers to support the Intel Video
Phone application, from the DOS prompt, go to
C:\WINDOWS\SYSTEM (or the SYSTEM subdirectory where Windows
95 is installed).
14
Rename the UNIMODEM.VXD and UNIMDM.TSP files by entering:
REN UNIMODEM.VXD UNIMODEM.BAK
REN UNIMDM.TSP UNIMDM.BAK
15
Copy the new files by entering COPY A:\UNIMODEM\ .
16
Refer to the documentation shipped with this version to finish
the installation.
Installing the ThinkPad Configuration Program for Windows
95
The ThinkPad Configuration program is supported by Windows 95
OSR2.0 and later.
Note: You can assign the directory in which the ThinkPad
Configuration program is installed. The ThinkPad
Configuration program installer does not support the use of a
long name for the directory in which the program is installed.
To install the ThinkPad Configuration program for Windows 95:
1
Start Windows 95.
2
Insert the Utility Diskette for Windows 95 into the diskette drive.
3
Click on Start.
120 IBM ThinkPad 600E Online Book
To Next Page
Loading...
