2
Insert the Audio Features Diskette for Windows 95/98 into the
diskette drive.
3
Click on Start.
4
Click on Run...
5
Type A:\SETUP and click on OK.
6
Click on Uninstall Crystal Drivers.
7
Click on Shut Down.
8
Remove the diskette from the diskette drive and restart the
computer.
9
When Windows 95 detects “Unknown Device”, insert the Audio
Features Diskette for Windows 95/98 Disk 1 into the diskette
drive and click on Next.
|
10
Select the Driver from disk provided the hardware
| manufactures and click on OK.
|
11
Follow the instructions on the screen.
|
12
When you are prompted to install the Windows 95 diskette,
| type C:\WIN95 and click on OK.
|
13
Select the Driver from disk provided the hardware
| manufactures and click on OK.
|
14
When you are prompt to insert Disk 2, insert the Audio
| Features Diskette for Windows 95/98 Disk 2 into the diskette
| drive and click on OK.
|
15
When you are prompt to insert Disk 3, insert the Audio
| Features Diskette for Windows 95/98 Disk 3 into the diskette
| drive and click on OK.
For Windows 95 OSR2:
To install the audio device driver for Windows 95:
1
Start Windows 95.
Chapter 8. Installing Software 125
To Next Page
Loading...
