Setting the RingCentral Application for New Zealand
The RingCentral** program allows you to set the number of rings for
incoming messages before the call is answered.
You can set the value by selecting Options, Answering, and then
Ring Options from the RingCentral menu.
The values
x
and
y
in the following fields must be between 2 and 5:
Answer after
x
rings if there are new messages.
Answer after
y
rings if there are no new messages.
Caller ID Support
The section on the Telephony Features mentions the support of the
“answering device with caller ID” function. This function can be used
only where caller ID services is available. Currently, this service is
available only in the U.S. and Canada.
16 IBM ThinkPad 600E Online Book
To Next Page
Loading...
