– The preset timeout is reached.
– Battery is low.
You can return to normal operation by:
– Pressing the Fn key.
– Opening the LCD.
– Turning the power switch on.
Your computer automatically returns to normal operation when:
– The preset timeout for the resume timer is reached.
Note:
For Windows 98 users:
You can set the System standby timer in the “Power Management
Properties” window.
For Windows 95 users:
You can set the Suspend Timer in the “Power Properties” window.
Note:
|
For Windows 98 users:
| You can set the alarm action by specifying Standby for the prompt When
| the alarm goes off, the computer will:
For Windows 95 users:
If you put a check mark in the Hibernate when battery becomes low check
box in the “Power Management Properties” window, the computer enters
hibernation mode when the battery is low.
Note:
For Windows 98 users:
You can set the timer in the Scheduled Tasks.
For Windows 95 users:
You can set the timeout with the resume on timer specification in the
“Power Properties” window.
Chapter 4. Using Your Computer with a Battery Pack 31
To Next Page
Loading...
