2
Type SETUP at the command prompt and press Enter.
| The “Windows Setup” appears.
| Note: The following window is a sample of the “Windows
| Setup” window. Yours might be different.
Windows Setup
===============
If your computer or network appears on the Hardware Compatibility List
with an asterisk next to it, press F1 before continuing.
System Information
Computer: MS-DOS System
Display: MagicMedia 256AV 1 24×768 256 small font
Mouse: Microsoft, or IBM PS/2
Note: If MS-DOS System with APM appears for the item
Computer:, APM is already installed. Press F3 to exit the
setup. Otherwise, go on to step 3.
3
Using the Arrow keys, position the highlighted cursor over
MS-DOS System and press Enter.
4
Position the highlighted cursor over MS-DOS System with
APM and press Enter.
5
Verify that the item Computer has changed to
MS-DOS System with APM on the screen:
Windows Setup
===============
If your computer or network appears on the Hardware Compatibility List
with an asterisk next to it, press F1 before continuing.
System Information
Computer: MS-DOS System with APM
Display: MagicMedia 256AV 1 24×768 256 small font
Mouse: Microsoft, or IBM PS/2
If not, return to step 3.
6
Press Enter to install APM.
7
Restart the system to make APM effective.
Chapter 4. Using Your Computer with a Battery Pack 43
To Next Page
Loading...
