a
Select the PC Card you want to move.
b
Click on the Up button.
Every time you click on the Up button, the PC Card is
moved toward the top of the list.
4
Click on the OK button to save the changes.
The changes are saved. To cancel the changes, click on the
Cancel button.
Changing the Resource Information for the PC Card
1
Double-click on the Auto Configurator Utility icon in the “PC
Card Director” window.
2
Select the PC Card you want to change from the left list box in
the “Auto Configurator Utility” window.
3
Click on the Edit... button.
The following window appears:
Auto Configurator Utility - Edit
Title
Card ID
I/O port 1
I/O Port 2
IRQ level
COM No.
Memory window 1
Base address
Size
Card offset
Memory window 2
Base address
Size
Card offset
Modem Card [2F8]
MODEM,MD24XC,116E2,118C2,FC2400,2460MC
Description:
Interrupt [IRQ] Level
Ok Cancel Help
4
You can change the following registered information for the PC
Card. The items that can be changed differ depending on the
PC Card.
Note: The current resource information is set as the default and appears in
the input field of each item. The number that can be set is displayed
in the pull-down list box.
Chapter 5. Using Your Computer with a PC Card 73
To Next Page
Loading...
