EasyManua.ls Logo

IBM THINKPAD A20M

IBM THINKPAD A20M
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety information
Note: In the U.K., by law:
The telephone line cable
must be connected after
the power cord.
The power cord must be
disconnected after the
telephone line cable.
DANGER
Electric current from power, telephone, and
communication cables is hazardous. To avoid shock
hazard, connect and disconnect cables as shown
below when installing, moving, or opening the covers
of this product or attached devices. The 3-pin power
cord must be used with a properly grounded outlet.
Turn everything OFF.
Turn everything OFF.
First, attach all cables to devices.
First, remove the power cord from
the outlet.
Attach the signal cables to
receptacles.
Remove signal cables from
receptacles.
Attach the power cord to an outlet.
Remove all cables from devices.
Turn the device ON.
To Connect
To Disconnect
Copyright IBM Corp. 2000 v

Other manuals for IBM THINKPAD A20M

Related product manuals