Distinctive functions of your computer
Startup Configuration Page 1/1
Boot Display ----------------------------------------------------
Screen Expansion ---------------------------------------------
Hotkey Beep ----------------------------------------------------
Fn Key Lock -----------------------------------------------------
Fast Boot --------------------------------------------------------
Boot Drive Sequence:
1st. --------------------------------------------------------
2nd. -------------------------------------------------------
3rd. --------------------------------------------------------
↑↓ ←→= Move highlight bar, = Change setting, F1 = Help
[ Auto ]
[Enabled ]
[Enabled ]
[Disabled ]
[Enabled ]
[Floppy Disk]
[CD-ROM]
[Hard Disk]
This submenu is used to set startup options and change the startup
sequence of the drives in your computer. It includes the following:
Boot Display sets the display output device on start up.
Screen Expansion expands or shrinks the screen on your com-
puter.
Hotkey Beep enables or disables beeps when an Fn key func-
tion is pressed.
Fn Key Lock enables or disables the Fn key lock function.
When enabled, you do not need to hold the Fn key to enable an
Fn key function. Simply press the Fn key, release it, then press
the other key(s) in the combination.
Fast Boot enables or disables Fast Boot feature on your com-
puter.
Fast Boot allows your computer to start up and resume faster.
When enabled, the BIOS communicates with the Windows 98
operating system with ACPI about Plug-and-Play resources set-
tings and information about previous start ups.
Boot Drive Sequence (1st, 2nd and 3rd) specifies the start up
sequence of local drives.
22 ThinkPad i Series 1200/1300 User's Reference
Get user manuals: See SafeManuals.com
To Next Page
Loading...
Need help?
General
