Customizing Your TrackPoint Pointing Device
The TrackPoint Keyboard Press-to-Select and third-button scrolling
functions are enabled through TrackPoint Properties.
To open TrackPoint Properties:
In Windows 98, Windows 95 or Windows NT 4.0
– Click on Start, select Settings and then select Control
Panel and double-click on the TrackPoint icon,
or
– Click on the TrackPoint icon in the Sys tray on the lower
right-hand corner of the desktop.
In OS/2 Version 4
1. Double-click on the OS/2 System icon on the desktop.
2. Double-click on the System Setup icon.
3. Double-click on the TrackPoint icon.
Note: The screen instructions in the OS/2 Version 4 operating system
will be slightly different from the instructions illustrated in this
section. However, OS/2 Version 4 supports all of the functions
described below.
Note: You must click on OK or Apply for new settings to take
effect.
1-16 TrackPoint Keyboard User’s Guide
To Next Page
Loading...