!
!
5!
!
!
Note:
1. If the pairing was not successful, turn off the speaker and re-pair again.
2. After successful pairing, paired devices will remember each other so there is no need to
pair again unless pairing information is deleted.
3. To pair with a new device, just follow steps 1-4 above after UN-pairing the existing
device.
3. Re-connecting to a paired device
If the speaker does not connect to the last used device automatically, then you will need to
select it manually from the list of devices on your mobile device.
4. Pair iBright speaker with a different device
First disconnect with existing device by either long pressing the PLAY/PAUSE button or
switching off Bluetooth connection of the existing device, and then pair with other device
following the above steps 1-4 .
5. Hands-free phone calls
1. Make sure mobile phone is paired to speaker
2. Press the HANDSFREE button to answer an incoming phone call.
To Next Page
Loading...