IC Audio AMP 240 - Page 9

LED - Display
ON/OFF - Switch
Power LED
9
EN
ic audioic audio
Device Functions
- Front side -
The LED-Display shows the recording level of the
Power-Amplifier. The green LEDs show the range
in which the AMP 120/240/480 could be operated
permanently. The red LED shines only when
running in full conduction. This zone is not
advisable for long-term usage.
LED - Display
With this switch you turn on the apparat.
After turning the machine on, the LED is shining
blue. Before turning the machine on, the Master
controller should be set to a low volume.
ON/OFF - Switch
AMP 120/ 240/ 480
MIC/LINE
MUSIC
AMP 120/ 240/ 480
MIC/LINE
MUSIC