IC Audio AMP 480 - Speaker Outputs and Zones

POWER INPUT:350WATTSPOWER INPUT:350WATTSPOWER INPUT:350WATTS
POWER INPUT:350WATTSPOWER INPUT:350WATTS
MI C/ LI NE I NP UT
REMOTE START
LINE
MIC
SENS
MU SI C OU TP UT
MU SI C IN PU T
POWER INPUT:350WATTSPOWER INPUT:350WATTS
POWER INPUT:350WATTSPOWER INPUT:350WATTS
REMOTE START
LINE
MIC
SENS
If you want to use the amplifier only temporarily
and have the loudspeakerzone muted in normal
condition, you can use the SPEECH/ONLY-Output.
This output is only working when having contact
on the priority terminal.
Disjoined Announcement Zones
all the time
only when priority
ic audio
14
Device Functions
- Rear side -
The power amplifier provides two different speaker
zones.
! The Music/Speech - Output gives an output at
all times reproducing any signal input into the
amplifier.
! The Speech Only - Output will only work, when
the PRIORITY terminal is connected.
100V Speaker Output 8ohm Speaker Output
This output allows connection of standard low
impedance speakers. The minimum load
impedance must be 8W. When two or more
speakers are connected, ensure that they are
wired in such a way, that the load impedance is
between 8W and 16W.
EN
Priority-terminal
AMP 120 / AMP 240
Priorität
Normal
SPEECH ONLY
MUSIC / SPEECH
AMP 480
MIC/LINE