ic audio
EV-5000
EN
24
1. Save file 1 = 16 kHz test tone – this file must be first and original file on the card
2. Delete all files on the SD card
3. 16 kHz test tone mark, copy and paste
4. Preannouncement chime mark, copy and paste
5. Emergency announcement 1 mark, copy and paste
6. Emergency announcement 2 mark, copy and paste
7. Message mark, copy and paste
8. Chime for breaks mark, copy and paste
After reinserting the SD card into the EV-5000, the sequence can be checked by pressing the
PROGRAM key and then T4. The file numbers and the file names are displayed one after another.
The file names may contain up to 8 characters.
The 16 kHz test tone has to be placed first and as original sound file on the card, it is stored also
first on the card on delivery.
Each of the 6 above mentioned storage places have to be recorded. If places are not used, store
empty sound files instead.
Sound files should have a 1 second pause at the beginning – with the exception of the test tone of
course.
To Next Page
Loading...