Need help?Do you have a question about the icam E Series and is the answer not in the manual?
General| Data Logging | Yes |
|---|---|
| Dimensions | Varies by model |
| Interfaces | Ethernet, RS-485 |
| Communication Protocol | TCP/IP |
| Temperature Range | -20° to 70°C (-4° to 158°F) |
| Operating Temperature | -20° to 70°C (-4° to 158°F) |
Explains how smoke detection works by measuring light scattering in an optical chamber.
Details the system's monitoring of blockages or disconnections in sample tubes.
Describes default alarm states (ALERT, ACTION, FIRE1, FIRE2, TRACE) and their behavior.
Explains how alarms clear, user interaction, and fault indications during alarms.
Details the display panel, its indicators, and user-operable functions like ACCEPT, RESET, ISOLATE.
Provides diagrams for unit mounting locations and fixing points for different models.
Guides on connecting power, communication, and I/O modules to the FireTracer units.
Specifies how to connect sampling tubes for different FireTracer models, including material and length.
Covers the initial power-up sequence and the flow normalization process for specific models.
Explains connecting and configuring the e-series display panel remotely.
Details user functions (ACCEPT, TEST) and how to access main menu modes with codes.
Describes operator functions (RESET, SILENCE, ISOLATE) requiring an access code.
Guides on accessing the main menu, engineering mode, and inspecting system values.
Lists and explains user-settable parameters for configuring the FireTracer unit.
Covers setting sector day/night alarms and configuring system time and date.
Guides on setting IP address/mask and navigating the setup menu for languages and modules.
Explains the setup and configuration for various I/O modules like Relay, Output, and Input modules.
Details electrical supply considerations and specifications for RS485 communication cables.
Provides guidance on minimizing interference and proper cable termination for RS485 communication.
Outlines connecting the e-series to a PC via RS232 and installing the monitor software.
Describes the software's display emulator, configuration, engineering, and data logger functions.
Details daily/weekly routine checks and periodic servicing schedules for trained engineers.
To Next Page