Icar RPC 8BGA Quick Guide

ICAR PQS ALL65 rev7 jan18
6 / 12
RPC 8BGA Regulator
Front description
Navigation keys

Confirmation key

Alarm LED
!
Optical port for WIFI e USB connection
Parameters set-up
At the first power up of the automatic power factor correction equipment, carry out the following operations:
a) Enter date and time. The power factor regulator shows the page:
In this page, increase or decrease the numerical values with the  keys. Use the  keys to move
from one number to the other. Confirm with the  key.
b) Enter the desired language. The power factor regulator shows the page:
confirm with the  key to switch to the LANGUAGE page.
In this page, select the language with the  keys and confirm with the  key.
c) Enter the external CT primary value. The power factor regulator shows the page:
confirm with the  key to switch to the CT PRIMARY page.
In this page, select the CT primary value with the  keys and confirm with the  key.
For any further modifications of the CT primary value, select the SETUP menu, then the M02 GENERAL
menu. Select the parameter P02.01 CT primary value. Repeat the above operations.

Icar RPC 8BGA Specifications

General

Brand	Icar
Model	RPC 8BGA
Category	Controller
Language	English