7
ENGLISH
7
In case the front louver is not enough, the exit is either total or partially obstructed or due to its placement
it will receive hot air from another device, we recommend, in case it is not possible to change the location
of the machine, TO INSTALL A WATER CONDENSER.
IT IS IMPORTANT THAT THE WATER PIPING DO NOT PASS BY OR NEAR SOURCES
OF HEAT SO AS NOT TO LOSE ICE PRODUCTION.
THREAD THE SUPPORT LEGS TO THE BASE OF THE MACHINE ON THE
HOUSING SET TO SUCH END AND REGULATE THE HEIGHT AS TO HAVE THE
EQUIPMENT PERFECTLY LEVELED.
IN MODULAR MACHINES
Base jack
Bib
Discharge hose
Water connection hose
Jack
Ventilation louver
>10 cm
>4''
Jack
Base jack
Bib
Silo drainage
Water connection hose
Condenser discharge outlet
>10 cm
>4''
To Next Page
Loading...