UNIT IDENTIFICATION
Each IceBox unit is supplied with a self-adhesive identification label. The label displays the
following information:
• Serial number
• Unit model
• Fan supply air volume (l/s)
• Motor kW
The labels are located on the outside of the access door of each fan section. Any communication
with the Oceania Solutions Group service department will require the corresponding serial number
to be provided for identification of the IceBox unit.
MORE FROM THE ICEBOX RANGE
IceBox modular AHUs can be
used for both indoor and outdoor
installations, with the proven ability to
perform in tropical to below freezing
temperatures.
To suit your thermal bridging requirements, non-cold tracking options are
available. All units are manufactured in accordance with EN1886:2007
and built to comply with Australian Standards AS/NZS 3666, with
particular attention to access for cleaning and maintenance.
With features and benefits that can be included as standard, IceBox
modular AHUs are available today and ready for your next project.
ICEBOX
AIR HANDLING
UNITS
RECENT PROJECT:
NUDGEE COLLAGE
ICEBOX FAN COIL UNITS IOM | 13
To Next Page
Loading...
Need help?
General