EasyManuals Logo

Iceco PB250WH User Manual

Iceco PB250WH
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Discharging Protection: The PB250WH can power your devices at
temperatures ranging from 0°C to 45°C. When there is discharging
output in below -15°C or over 63°C conditions, the system would
stop discharging automatically; and system starts discharging
function again when temperature is over 0°C.
Make sure that the electronic device you are powering works properly prior to use.
The max. power consumption for electronic devices is 100W.
Due to the different types of electric devices, it is possible that they may not operate
even if their power consumption is less than 100W.
ATTENTION
! !
5.3. Storage and Downtime Maintenance
Please charge your PB250WH fully before storage and fully
recharge your PB250WH every 3 months and store it in a cool,
dry place.The storage temperatures range from -20°C to 45°C.
If the system shuts down automatically because of lower battery
capacity, please recharge it.
Failure to maintain your PB250WH by following these steps can
result in battery damage which will void the product warranty.
08
Instruction Manual | PB250WH Undead Car Charger
Cold temperatures (below freezing) can impact the PB250WH
battery capacity and the output power. Charging Protection:
The PB250WH can be recharged at temperatures ranging from
5°C to 45°C. When there is charging input in below 3°C or over
47°C conditions, the system would stop charging automatically;
and system starts charging function again when temperature is
over 5°C.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Iceco PB250WH and is the answer not in the manual?

Iceco PB250WH Specifications

General IconGeneral
BrandIceco
ModelPB250WH
CategoryAccessories
LanguageEnglish